What should be paid attention to when using plastic bucket

- Mar 28, 2020-

Plastic bucket explains in detail how to avoid aging of plastic bucket

In order to deal with the aging results, some anti-aging agents are often added to the plastics to slow down the aging speed. In fact, this does not basically deal with the results. In order to make the plastic products durable, the main thing is to use them properly, not to let the sun exposure, not to let the rain, not on the fire or heating, not to often contact with water or oil, etc. In addition, try to prevent the use of plastic containers or bags to contain light or hot food. Plastic products can not be forced to collide, nor can they often be exposed to the sun at low temperature. The collision is easy to break, and the exposure is easy to slow down its aging, so as to reduce the service life.

What should be paid attention to when using plastic buckets.

For future use, the products supported by the cover and the plastic can body should be considered first, otherwise the cover and the can body do not match, which is easy to cause liquid leakage. In the process of disposal, please do not drag the bucket indirectly on the ground to prevent abrasion and scratches on the bottom. The correct way is to lift it with both hands or transport it by forklift pallet. Pay attention to the use, the liquid temperature shall not be higher than 70 ℃, and the loading and transportation temperature shall not exceed 25 ℃. It is strictly prohibited to fill in the plastic bucket and transport the low-temperature liquid immediately after loading. It should also be stored in a clean and dry center to avoid the inside of the cleaning material barrel mouth and direct exposure to sunlight.

The plastic bucket used should be lubricated inside and outside, seamless without welding, light weight, good strength, impact resistance, corrosion resistance, non-toxic and tasteless, and easy to transport. Its heat acceptance range is generally within - 40 ℃ to 60 ℃. If it exceeds this temperature, the plastic bucket will be deformed or even crack. So we need to ensure that the temperature does not exceed this range when we use it. If we need to exceed this temperature, we need to take some precautions.