Analysis of the structure and shape design of the engine oil can

- Sep 20, 2019-

Car is one of the indispensable means of transportation for modern people. For the car, in the usual maintenance, it is necessary to change the oil regularly. Now the common engine oil can  capacity in the market is about 4L, of course. There are also a lot of 1L and 2L. This kind of canned motor oil is mainly for people to change the oil of the car. Therefore, the shape of the oil bottle and the engine oil can  we see is a bit special. Why is it designed like this? What? The following small series for everyone to analyze:

The square design of the plastic engine oil can  can be easily stacked, and it is rounded to many other cans. Only one can be placed in one position, which is a place where the square tank can be stacked. Put, it will not take up space, beautiful and practical, with no deformation, white liquid level line more accurate and timely understanding of the capacity of the liquid, etc., can be printed and filmed according to customer needs, and a variety of color styles, It is made of HDPE raw material and has good acid and alkali resistance and sealing.

Under normal circumstances, the bottom film line of the engine oil can  barrel is very thick, the wall thickness should be at the corner of the product, but the angle of the general bottom should be thicker than the angle of the top, and the thickness of the lower part of the product should be thicker. The upper part should be larger. It is possible to determine the uniformity of the wall thickness of the product by the wall thickness or the wall thickness ratio according to the product. If the wall thickness ratio of the symmetrical part is evaluated, 1:1.5 should be the upper limit. It should be noted that the items that cannot be shipped in the engine oil can  are: dangerous goods that require one type of packaging, such as fuming sulfuric acid, concentrated nitric acid above 55% concentration and fuming nitric acid. Benzene, toluene, xylene, chlorobenzene, gasoline, condensate, liquid ammonia, liquid chlorine, ethylene oxide, and the like.

The more common material types of engine oil can s are HDPE and tinplate. Today's automobile industry is so developed, and the demand for canned motor oil will only be larger and larger. As a professional packaging container manufacturer, we will continue to rely on it. The changing times and the needs of customers, design more superior products, so that consumers get a better experience.