A better way to make plastic buckets

- Mar 31, 2020-

The data of plastic buckets are mostly made of polyethylene, polypropylene, polyester and other plastics, such as blow molding, injection molding, blistering and roll molding, and are mostly used to contain liquid and solid articles in chemical industry, pesticide, medicine, food, hardware and electronics, electromechanical and other industries. Specifications are from 0.25L to 220l open plastic bucket and 1000L container plastic bucket. It can be used for goods storage or transportation.

A better way to make plastic buckets.

1. Pay attention to the accuracy of the position of the mold device, the device is solid. The position of the blowing rod is accurate and the temperature of the billet cutter is suitable. Avoid waste products or unsafe accidents due to inaccuracies of components such as dies and blowing rods.

2. Select the appropriate plastic raw materials as the molding data to avoid impurities or metals in the plastic raw materials, so as to avoid unexpected damage of the extruder.

3. Pay attention to whether the setting of molding temperature is correct. When the molding temperature does not reach the processing temperature of plastic raw materials, stop starting the machine to avoid unexpected damage of the extruder.

4. When the machine is started, especially when the plastic mold is extruded, the operator needs to keep a certain safe interval with the head to avoid the abnormal shape of plastic melt due to the high processing temperature, which is generally called blistering. When it is found that the molding temperature of the plastic bucket manufacturer is too high, the operator can wait for the cooling temperature to reduce and then stop the machine. When the machine is started, the operator should stop the personnel from approaching the head to the left and avoid it Operators shall not be scalded by plastic melt at low temperature.